Chromatography Supplies
Waters Corp Resolve Radial-Pak Column, Cyano (CN), 10 μm, 5 mm x 100 mm
These non-endcapped Resolve packings differ significantly from other packing materials, leading to a change in chromatographic behavior, most notably with polar compounds which typically exhibit greater retention.
- Chemistry: Cyano (CN)
- Separation mode: Reversed phase
- Particle substrate: Silica
- pH range: 2 to 8
- Maximum pressure: 6000 psi (415 bar)
- Endcapped: No
- Silanol activity: High
- Particle shape: Spherical
- Particle size: 10 μm
- Pore size: 90 Å
- Format: Radial-Pak column
- Surface area: 200
- System: HPLC
- USP classification: L10
- Inner diameter: 5 mm
- Length: 100 mm
- Carbon load: 3%
- Units per package: 1
Waters Corp Tubing Assembly, Stainless Steel, Pre-Heater to Column, Reusable
This reusable stainless steel tubing assembly is designed as a replacement part for connecting a pre-heater to a column, specifically associated with a CH-30A column heater.
- Replacement tubing assembly
- Made of stainless steel
- Connects pre-heater to column
- Reusable
- Associated with a CH-30A column heater
- Designed for UPLC systems
Cole-Parmer Idex 1524L Chromatography Tubing, Natural FEP, 3/16" OD x 0.125" ID x 50 ft L; 1/EA
FEP (fluorinated ethylene propylene) tubing is ideal choice for general, low pressure applications. Most FEP tubing is translucent, so you can see liquid flow.
Aqua Solutions PNP Mobile Phase pH 6.00 +- 0.02 (0.2 uM filtered), 4L
Boiling point/Boiling range: 64.4 °C (147.9 °F), Flash point: 11 °C (51.8 °F)
Waters Corp Tubing Assembly, MP35N, Pre-Heater to Column, UPLC System
This tubing assembly is a replacement part for use with a CH-30A column heater in a Bio-compatible system. It connects the pre-heater to the column.
- Designed for UPLC systems.
- Constructed from MP35N material.
- Connects pre-heater to column.
Waters Corp Waters Tubing Assembly, Analytical Column, Union to Outlet
This tubing assembly is designed to connect an analytical column union to the column outlet. It also facilitates the connection of the analytical column outlet to the column out bulkhead.
- Connects analytical column union to column outlet.
- Connects analytical column outlet to column out bulkhead (Left side top).
ANALYTICAL SCIENTIFIC INSTRUMENTS US INC 0.5 MICRON SST FRIT ULTRASHIE
NC2749060 0.5 MICRON SST FRIT ULTRASHIE
Waters Corporation Washer, Inject Port Seal, for 2790/2795 Separations Module
The Inject Port Seal Washer is located in the inject port of the 2790/2795 Separations Module. It requires replacement if it is leaking or obstructing the inject port flowpath. This component is replaced simultaneously with the inject port seal washer and the inject port seat.
- Ensures proper sealing within the inject port.
- Prevents leaks in the inject port.
- Maintains clear flowpath within the inject port.
Bellco Glass, Inc. L-Bubbler Tube W/Frit, 15L
Manufactured from 316l electropolished 1/4" stainless steel with hose barb. Ideal use for sparging of vertical sidearm spinner flasks. Includes polypropylene cap with 1/4" compression fitting and white silicone gasket. 10 micron porosity frit for cell cultures where shear is critical. Includes pp cap with 1/4" compression fitting and white silicone gasket. MADE IN THE USA. DIMENSIONS: 20 X 5 1/8"
IDEX Health & Science Upchurch IDEX HEALTH & SCIENCE UPCHURCH
NC4020929 FLNGLS SYS SHORT BLK DELR 1/16